Case IH AF Series
Case IH AF9
The Case IH AF9 delivers Class 9 capacity, power and performance with the largest AFXL single rotor in the industry. Powered by a 12.9 L Case IH-FPT engine producing up to 466 kW, it combines gentle Axial-Flow threshing with a 35% larger Cross-Flow Plus cleaning system and a 16,000 litre grain tank to maximise throughput across any crop condition.
Case IH AF10
The Case IH AF10 is the flagship Class 10 combine, delivering the industry's highest capacity with the largest AFXL single rotor and grain tank available. Powered by a 15.9 L Case IH-FPT engine producing up to 570 kW, it combines gentle Axial-Flow threshing with a 35% larger Cross-Flow Plus cleaning system and a class-leading 20,000 litre grain tank to maximise throughput and unload speed across any crop condition.
| Model | AF9 (Class 9) | AF10 (Class 10) |
|---|---|---|
| Engine | ||
| Type | Case IH – FPT | |
| Displacement | 12.9 L | 15.9 L |
| Horsepower – Small Grains (Rated/Peak) | 425 kW / 466 kW (578 / 634 HP) | 522 kW / 570 kW (710 / 775 HP) |
| Horsepower – Corn and Beans (Rated/Peak) | 400 kW / 466 kW (544 / 634 HP) | 490 kW / 570 kW (666 / 775 HP) |
| Rated Engine Speed / Low Idle | 1,900 rpm / 800 rpm | |
| Fuel Tank | 1,300 L | 1,500 L |
| Batteries / Alternator | 3 × 12V (99 A.h) / 240 A | |
| Feeder | ||
| Feeder Width | 1,430 mm | |
| Feeder Length (with Rock Trap/SFS) | 2,156 mm | |
| Feeder Drive / Reverser | Power-Plus CVT Drive / Power-Plus CVT Hydraulic | |
| Head Lift Cylinders (Std/Opt) | 95 mm / 110 mm | |
| Lift Capacity (Std/Opt) | 5,500 kg / 6,800 kg | |
| Lateral Tilt Range | +/- 5° | |
| Fore/Aft Faceplate Tilt | 16° | |
| Stone Trap / SFS | Staggered Straight Serrated with enhanced rock catching | |
| Threshing / Separating | ||
| Threshing Type | Rotary – Single Rotor | |
| Rotor Drive / Speeds | Power-Plus CVT Drive / 235–1,180 rpm | |
| Rotor Diameter / Length | 762 mm / 3,670 mm | |
| Concave / Modules | 2 pair (2 LH and 2 RH) | |
| Separating Grates / Modules | 4 pairs (4 LH and 4 RH) | |
| Threshing / Separating Wrap | 180° / 180° | |
| Discharge Beater (Std/Opt) | MagnaCut Integral Chopper / Beater with MagnaChop High Hood Mounted Chopper | |
| Grain Loss Monitor | Standard, with LH and RH sensors | |
| Cross-Flow Plus Cleaning System | ||
| Cleaning System Width | 1,790 mm | |
| Total Sieve Area / Sensors | 8.7 m² / 4 | |
| Cleaning Capability Slope | Up to 25% (13°) | |
| Cleaning Fan (Drive) / Speed / Diameter | Cross-Flow fan (hydraulic) / 300–1,150 rpm (+/- 50 rpm w/ AutoFan) / 432 mm | |
| Conveying & Storage | ||
| Tailings Elevator | Qty. 1, Inclined Auger with Rethresher | |
| Clean Grain Augers | Qty. 2 | |
| Clean Grain Elevator (W×H / Capacity) | 300 × 451 mm / Standard 8,000 bu/hr (Optional 10,000 bu/hr) | |
| Grain Tank Capacity | 16,000 L | 20,000 L |
| Unloading Auger Length | 11.5 m (up to 18.6 m / 13.7 m Controlled Traffic) | |
| Unloading Rate (Std/Opt) | 210 L/s / 159 L/s | 210 L/s |
| Dimensions | ||
| Wheel Base – 2WD Axle | 4,044 mm | |
| Width* | 3,948 mm (VF900/65R46 on 762mm/30" row) | |
| Min. Weight 2WD** / Typical 2WD† / Typical 4WD†† | 21,342 kg / 23,650 kg / 24,137 kg | 23,023 kg / 25,509 kg / 25,996 kg |
| Transport Height | 3,980 mm | |
| Technology | ||
| FieldOps | AccuSync, AccuGuide, Yield & Moisture Monitoring, Remote Display Viewing, 2-Way File Transfer, AFS1 Correction Signal (AFS3 optional) | |
| Combine Automation | Harvest Command, Radar Spread Automation, Grain Cameras |