New Holland Large Balers
New Holland BigBaler 870 Plus
The New Holland BigBaler 870 Plus is the entry point into the BigBaler Plus range, giving hay, straw and fodder operations a dependable, well-proven large square baler without stepping up to a bigger frame. Producing an 80 x 70cm bale, it's built around the proven MaxiSweep™ pickup, Loop Master™ double-knot tying and a choice of Packer, Packer Cutter or CropCutter™ feeding to suit straw, hay or silage work.
New Holland BigBaler 890 Plus
The New Holland BigBaler 890 Plus builds on the 870 Plus with a taller 90cm bale, giving hay, straw and fodder operations more density and stacking efficiency per bale without a larger footprint. It carries the same proven MaxiSweep™ pickup, Loop Master™ double-knot tying and choice of Packer, Packer Cutter or CropCutter™ feeding systems for straw, hay or silage work.
New Holland BigBaler 1290 Plus
The New Holland BigBaler 1290 Plus tops the Plus range with a full 120 x 90cm bale chamber, built for the largest broadacre hay, straw and fodder operations that need maximum bales-per-hour without stepping up to a High Density model. It shares the reinforced gearbox, high-inertia flywheel and SmartFill™ II bale direction sensing of the 1270 Plus, with a taller chamber for denser, heavier bales and better stacking efficiency.
New Holland BigBaler 1270 Plus
The New Holland BigBaler 1270 Plus steps up to a full 120cm wide bale chamber, giving broadacre hay, straw and fodder contractors serious throughput and stacking efficiency. Built on the heavy-duty Plus platform with a strengthened gearbox, high-inertia flywheel and SmartFill™ II bale direction sensing, it's available in Packer or CropCutter™ configuration to suit straw, hay or silage operations.
New Holland BigBaler 1290 High Density
Bale Dimensions
- Width - 120cm
- Height- 90cm
- Minimum / Maximum length - 100/300 cm
| Model | BigBaler 870 Plus | BigBaler 890 Plus | BigBaler 1270 Plus | BigBaler 1270 Plus Density | BigBaler 1290 Plus |
|---|---|---|---|---|---|
| Bale Dimensions | |||||
| Width x Height | 80 x 70 cm | 80 x 90 cm | 120 x 70 cm | 120 x 70 cm | 120 x 90 cm |
| Length (Min/Max) | 100 - 260 cm | ||||
| Versions & Tractor Requirements | |||||
| Available Versions | Packer / Packer Cutter / CropCutter™ | Packer / Packer Cutter / CropCutter™ | Packer / CropCutter™ | Packer / CropCutter™ | Packer / CropCutter™ |
| Min PTO Power (Packer) | 80 kW / 109 hp | 80 kW / 109 hp | 90 kW / 122 hp | 95 kW / 130 hp | 95 kW / 130 hp |
| Min PTO Power (Packer Cutter) | 85 kW / 116 hp | 85 kW / 116 hp | — | — | — |
| Min PTO Power (CropCutter™) | 100 kW / 136 hp | 100 kW / 136 hp | 110 kW / 150 hp | 118 kW / 160 hp | 118 kW / 160 hp |
| PTO Speed / Shaft Type | 1,000 rpm / 6, 20 or 21-spline shaft | ||||
| Hydraulic Remotes | 2 double-acting + 1 single-acting (3 double-acting + 1 single-acting optional) • Load sensing Power Beyond | ||||
| Pickup & Feeding | |||||
| MaxiSweep™ Pickup Width | 1.96 m | 1.96 m | 2.23 m std / 2.35 m opt | 2.23 m std / 2.35 m opt | 2.23 m std / 2.35 m opt |
| Tine Diameter | 5.5 mm | ||||
| Feeder / Rotor Width | 800 mm (Cutter/CropCutter) | 800 mm (Cutter/CropCutter) | 1,200 mm | 1,200 mm | 1,200 mm |
| Feeder Design | 2 packer forks (Packer) / 3 forks + 6 single tines (Cutter/CropCutter) | 2 packer forks (Packer) / 3 forks + 6 single tines (Cutter/CropCutter) | 3 packer forks + 9 single tines | 3 packer forks + 9 single tines | 3 packer forks + 9 single tines |
| CropCutter™ Crop Processing | |||||
| Knife Options | 6 (Packer Cutter) / 9 or 19 (CropCutter) | 6 (Packer Cutter) / 9 or 19 (CropCutter) | 15 or 29 | 15 or 29 | 15 or 29 |
| Knife Distance | 114 mm / 78-39 mm | 114 mm / 78-39 mm | 78 / 39 mm | 78 / 39 mm | 78 / 39 mm |
| Knife Removal / Activation | Sliding knife drawer (front access) • Hydraulic in/out activation • Individual spring knife protection | ||||
| Pre-compression Chamber Volume | 0.25 m³ | 0.25 m³ | 0.3 m³ | 0.3 m³ | 0.3 m³ |
| Plunger & Main Drive | |||||
| Plunger Speed | 48 strokes/min | ||||
| Stroke Length | 710 mm | ||||
| Gearbox | Enclosed, oil-immersed triple reduction gearbox • Shear bolt, overrunning clutch & slip clutch protection | ||||
| Density / Chamber Reinforcement | Standard | Standard | Standard | Reinforced plunger (+30% load) & bale chamber (+10% density) | Standard |
| Tying System | |||||
| Knotter Type | Loop Master™ double-knot | ||||
| Number of Twines | 4 | 4 | 6 | 6 | 6 |
| Knotter Fans (Standard / Extra Optional) | 2 / +2 optional | 2 / +2 optional | 3 / +3 optional | 3 / +3 optional | 3 / +3 optional |
| Twine Ball Capacity | 32 | ||||
| Electronics & Automation | |||||
| Bale Density Control |